without stone
Not compatible with USA/China goods with inch/gauge units.
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
Int.Titanium Labret 1.2 outer diameter with 0.8mm internal thread
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
FINALLY A REAL INNOVATION FOR PIERCERS
Flexible and relaxed when working with piercing jewelry
You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.
All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.
There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
Int.Titanium Labret 1.6 outer diameter with 1.2mm internal thread
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
INTERNALLY THREADED GOLD PVD Titanium LABRET PIN
Int. Titanium Labret Stud 1.2 outer diameter with 0.8mm internal thread
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
FINALLY A REAL INNOVATION FOR PIERCERS
Flexible and relaxed when working with piercing jewelry
You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.
All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.
There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | ball size, length |
FINALLY A REAL INNOVATION FOR PIERCERS
Flexible and relaxed when working with piercing jewelry
You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.
All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.
There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
The special advantage here is the large selection of attachments with 0.8mm thread.
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | ball size, length |
FINALLY A REAL INNOVATION FOR PIERCERS
Flexible and relaxed when working with piercing jewelry
You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.
All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.
There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | ball size, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | disc size, length |
FINALLY A REAL INNOVATION FOR PIERCERS
Flexible and relaxed when working with piercing jewelry
You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.
All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.
There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
FINALLY A REAL INNOVATION FOR PIERCERS
Flexible and relaxed when working with piercing jewelry
You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.
All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.
There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
Why should you go to the trouble of sterilizing all the jewelry yourself? Think about how much time you save on documentation and the process itself when you buy pre-sterilized piercing jewelry. The material costs for the packaging material, etc. are also out of all proportion here! Our sterile piercing jewelry has hardly any price difference to the non-sterile assembly. So go for it and put your feet up while you're sterilizing your jewelry!
THE STERILE JEWELRY IS NOT ASSEMBLED AND STERILIZED. THE STERILE PACKAGING ONLY CONTAINS INDIVIDUAL PARTS.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | diameter, length |
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm labrets are suitable for push pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
FINALLY A REAL INNOVATION FOR PIERCERS
Flexible and relaxed when working with piercing jewelry
You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.
All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.
There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | disc size, length |
INTERNALLY THREADED BLACK PVD Titanium LABRET PIN
Int.Titanium Labret 1.2 outer diameter with 0.8mm internal thread
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
INTERNALLY THREADED 24K GOLD PVD Titanium LABRET PIN
Int. Titanium Labret Stud 1.6 outer diameter with 1.2 mm internal thread
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
INTERNALLY THREADED ROSEGOLD PVD Titanium LABRET PIN
Int.Titanium Labret 1.2 outer diameter with 0.8mm internal thread
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
FINALLY A REAL INNOVATION FOR PIERCERS
Flexible and relaxed when working with piercing jewelry
You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.
All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.
There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
INTERNALLY THREADED BLACK PVD Titanium LABRET PIN
Int.Titanium Labret 1.6 outer diameter with 1.2mm internal thread
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
FINALLY A REAL INNOVATION FOR PIERCERS
Flexible and relaxed when working with piercing jewelry
You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.
All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.
There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
Finally, a beautiful labret made of real gold!
The price depends on the current gold price and we reserve the right to make price changes if necessary.
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |