without stone

FINALLY A REAL INNOVATION FOR PIERCERS

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

Unfortunately, some companies do not use standardized 0.9 mm threads, which is why there may be fitting problems with standardized Labrets (including fleXternal Labrets).

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

FINALLY A REAL INNOVATION FOR PIERCERS

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

FINALLY A REAL INNOVATION FOR PIERCERS

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS

FINALLY A REAL INNOVATION FOR PIERCERS

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

FINALLY A REAL INNOVATION FOR PIERCERS

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS

FINALLY A REAL INNOVATION FOR PIERCERS

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

FINALLY A REAL INNOVATION FOR PIERCERS

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS

The flexible & relaxed way to work with piercing jewellery.

From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!

Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.

There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm labrets are suitable for push pin attachments without shortening them!

FINALLY A REAL INNOVATION FOR PIERCERS

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!