German
Italian
French
Spanish
Polishsilver colored
Items 1 - 4 of 4
This insertion pin is ideally suited for the use on externally threaded piercing jewellery.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be detached.
The insertion pin is made out of SS316L surgical steel.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be detached.
The insertion pin is made out of SS316L surgical steel.
This insertion pin is ideally suited for the use on externally threaded piercing jewellery.
The insertion pin itself has an internal thread, into which you can screw the jewellery with external thread.
The insertion aid is available in the following strengths:
- 1.2 mm, 1.6 mm
As soon as the jewellery is screwed into the insertion pin, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion aid can simply be unscrewed.
The insertion pin is made out of SS316L surgical steel.
The insertion pin itself has an internal thread, into which you can screw the jewellery with external thread.
The insertion aid is available in the following strengths:
- 1.2 mm, 1.6 mm
As soon as the jewellery is screwed into the insertion pin, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion aid can simply be unscrewed.
The insertion pin is made out of SS316L surgical steel.
This insertion pin is ideally suited for the use on externally threaded piercing jewellery.
Furthermore this insertion aid is also suitable for the use of jewellery with larger diameters, such as tunnels or thicker rings.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, 10.0 mm, 12.0 mm, 14.0 mm, 16.0 mm. 18.0 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be unscrewed.
Furthermore this insertion aid is also suitable for the use of jewellery with larger diameters, such as tunnels or thicker rings.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, 10.0 mm, 12.0 mm, 14.0 mm, 16.0 mm. 18.0 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be unscrewed.
Top
This insertion pin is ideally suited for the use on externally threaded piercing jewellery.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be detached.
The insertion pin is made out of Titanium Ti6Al4V-ELI (ASTM F 136).
Length: 50 mm
Due to it's high surface quality with a ra-value between 0.07 µm and 0.08 µm, we have achieved an almost highly polished surface. This makes the whole process of anodizing the tapers so much easier. From now on you can use a colour code to distinguish the different sizes and thus simplify your everyday studio routine during the sterilization process. Measuring the diameter will not be necessary anymore, you can now start packing your items right away.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be detached.
The insertion pin is made out of Titanium Ti6Al4V-ELI (ASTM F 136).
Length: 50 mm
Due to it's high surface quality with a ra-value between 0.07 µm and 0.08 µm, we have achieved an almost highly polished surface. This makes the whole process of anodizing the tapers so much easier. From now on you can use a colour code to distinguish the different sizes and thus simplify your everyday studio routine during the sterilization process. Measuring the diameter will not be necessary anymore, you can now start packing your items right away.
Items 1 - 4 of 4