German
Italian
French
Spanish
Polishscrew system (for internal)
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm labrets are suitable for push pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm labrets are suitable for push pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles, fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm labrets are suitable for push pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
The insertion aid itself has an external thread which can be screwed seamlessly into internally threaded jewellery of any kind.
The insertion pin is available in the following variations:
- 0.8 mm external thread with material strength 1.0 mm for jewellery with 0.8 mm internal thread and 1.0 mm strength
- 0.8 mm external thread with material strength 1.2 mm for jewellery with 0.8 mm internal thread and 1.2 mm strength
- US0.9 mm external thread with material strength 1.2 mm for jewellery with US0.9 mm internal thread and 1.2 mm strength
- 1.2 mm external thread with material strength 1.6 mm for jewellery with 1.2 mm internal thread and 1.6 mm strength
As soon as the insertion pin is screwed onto the piercing jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be unscrewed.
The insertion pin is made of SS316L surgical steel.
Length: 35 mm
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles, fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm labrets are suitable for push pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all commonly used thread styles fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
ATTENTION:
With the stem-lengths 5 mm and 6 mm you can only use threaded attachments, as the pin of push-pin system attachment is too long.
With a stem-length of 7 mm to 10 mm, as soon as a push-pin system attachment is used on the other side, no more push-pin can be used. For reasons of space, only a threaded attachment can be on the other side of the barbell.
From a stem-length of 11 mm on, you can combine all 3 fixing-systems on both sides.
MADE IN GERMANY - CERTIFIED & CONTROLLED! Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
ATTENTION:
With the stem-lengths 4 mm - 7 mm you can only use threaded attachments, as the pin of push-pin system attachment is too long.
With a stem-length of 8 mm to 10 mm, as soon as a push-pin system attachment is used on the other side, no more push-pin can be used. For reasons of space, only a threaded attachment can be on the other side of the barbell.
From a stem-length of 11 mm on, you can combine all 3 fixing-systems on both sides.
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm labrets are suitable for push pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm labrets are suitable for push pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm labrets are suitable for push pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS