German
Italian
French
Spanish
Polishone-piece
Items 1 - 9 of 9
SS316L CASTING HINGED SEGMENT RING CLICK System
HANDPOLISHED- handpolished
GOLD PVD STEEL HINGED SEGMENT RING - Gold PVD Coating - Surgical Steel 316L - Clicker - handpolished
BLACK PVD STEEL HINGED SEGMENT RING - Surgical Steel 316L - Black PVD Coating - handpolished
ROSE GOLD PVD STEEL HINGED SEGMENT RING - Surgical Steel 316L - Rose Gold PVD - handpolished
This insertion pin is ideally suited for the use on externally threaded piercing jewellery.
Furthermore this insertion aid is also suitable for the use of jewellery with larger diameters, such as tunnels or thicker rings.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, 10.0 mm, 12.0 mm, 14.0 mm, 16.0 mm. 18.0 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be unscrewed.
Furthermore this insertion aid is also suitable for the use of jewellery with larger diameters, such as tunnels or thicker rings.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, 10.0 mm, 12.0 mm, 14.0 mm, 16.0 mm. 18.0 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be unscrewed.
Top
This insertion pin is ideally suited for the use on externally threaded piercing jewellery.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be detached.
The insertion pin is made out of Titanium Ti6Al4V-ELI (ASTM F 136).
Length: 50 mm
Due to it's high surface quality with a ra-value between 0.07 µm and 0.08 µm, we have achieved an almost highly polished surface. This makes the whole process of anodizing the tapers so much easier. From now on you can use a colour code to distinguish the different sizes and thus simplify your everyday studio routine during the sterilization process. Measuring the diameter will not be necessary anymore, you can now start packing your items right away.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be detached.
The insertion pin is made out of Titanium Ti6Al4V-ELI (ASTM F 136).
Length: 50 mm
Due to it's high surface quality with a ra-value between 0.07 µm and 0.08 µm, we have achieved an almost highly polished surface. This makes the whole process of anodizing the tapers so much easier. From now on you can use a colour code to distinguish the different sizes and thus simplify your everyday studio routine during the sterilization process. Measuring the diameter will not be necessary anymore, you can now start packing your items right away.
18K GOLD HINGED SEGMENT RING - handpolished
SS316L CASTING HINGED BCR RING - Surgical Steel 316L- handpolished
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all commonly used thread styles fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
ATTENTION:
With the stem-lengths 5 mm and 6 mm you can only use threaded attachments, as the pin of push-pin system attachment is too long.
With a stem-length of 7 mm to 10 mm, as soon as a push-pin system attachment is used on the other side, no more push-pin can be used. For reasons of space, only a threaded attachment can be on the other side of the barbell.
From a stem-length of 11 mm on, you can combine all 3 fixing-systems on both sides.
MADE IN GERMANY - CERTIFIED & CONTROLLED! Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
Items 1 - 9 of 9