Piercing pliers - Tools - Equipment
The insertion pin itself does not have an external thread, so you can simply attach it to internally threaded jewelry instead of having to screw it on first.
The insertion pin is designed for jewelry with a 0.8 mm internal thread and 1.2 mm material thickness.
As soon as the insertion pin is attached to the piercing jewelry, it can be inserted perfectly into the piercing site.
After insertion, the insertion aid can simply be pulled off effortlessly.
The insertion pin is made of SS316L surgical steel.
Length: 35 mm
| Item weight: | 0,00 kg |
| Variations in: | thread, material strength |
The wheel allows the pliers to be tightened as far as required until the desired area is perfectly fixed.
These pliers have an opening on the ring.
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | side (opening) |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | type, variation |
Our rounded ring tweezers with a cut are ideal for fixing a wide variety of piercing sites.
- The wheel allows the pliers to be tightened as far as required until the desired area is perfectly fixed.
- The cut allows you to easily pull the tweezers out from the side after piercing.
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | type, surface |
Clean cutting edges without protrusion or crushing.
- sterilizable
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material, surface |
This insertion pin is ideal for use with piercing jewelry with an Internal thread. The insertion pin fits both the 0.8 mm Internal and the 0.9 mm Internal Labrets.
The insertion pin is available in the following variations:
- 1.6 mm thickness
- 2.0 mm thickness
As soon as the insertion pin is screwed onto the piercing jewelry, it can be inserted perfectly into the piercing site.
After insertion, the insertion aid can simply be unscrewed from the jewelry.
The insertion pin is made of high-quality titanium Ti6Al4V-ELI (ASTM F 136).
Length: 30 mm
Thanks to the high surface quality with an Ra value between 0.07 µm and 0.08 µm, we have achieved an almost highly polished surface. This makes it easy to anodize the Insertion pins. Now you can define the sizes using a colour code and simplify your daily studio routine during sterilization. There is no need to measure the thicknesses and you can start packing straight away.
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | diameter |
DAM can be screwed into a base.
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | wiresize |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | for, color |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |