1.2 mm

1 - 20 / 72

System Reset all filters

Int. titanium Labret 1.2mm/03mm plate (0.8mm internal thread)

SKU: TILP0312

7,50 € *

Available immediately

INTERNALLY THREADED TITANIUM MICRO LABRET PIN (3MM DISC) - Titanium (ASTM F-136)
Not compatible with USA/China goods with inch/gauge units.

material strength
length

Go to item

Int. titanium Labret 1.2mm/04mm plate, 1.2 mm outer diameter (with 0.8 mm internal thread)

SKU: TILP0412

5,90 € *

Available immediately

INTERNALLY THREADED Titanium (ASTM F-136) LABRET PIN
Int.Titanium Labret 1.2 outer diameter with 0.8mm internal thread

material strength
length

Go to item

Push Pin Titanium threadless Labret 1.2mm with 4mm plate

SKU: TTLLP0412

9,50 € *

Available immediately

The Labret for a really great insertion system. 0.5 mm inner diameter and 1.2 mm outer diameter

material strength
length

Go to item

Push Pin Titanium threadless Labret 1.2mm with 3mm plate

SKU: TTLLP0312

9,50 € *

Available immediately

The Labret for a really great insertion system. 0.5 mm inner diameter and 1.2 mm outer diameter

material strength
length

Go to item

Int. titanium Labret gold 1.2mm/03mm plate (0.8mm internal thread) (PVD)

SKU: TILP03BG12

10,90 € *

Available immediately

INTERNALLY THREADED GOLD PVD TITANIUM MICRO LABRET PIN (3MM DISC) - Titanium (ASTM F-136)

material strength
length

Go to item

FLEXTERNAL Titanium Labret 4 mm d-Plate - 1.2 mm Stud with triangular plate (for 0.8 mm, 0.9 mm internal thread and Push Pin (TL)) - (Made in Germany)

SKU: TLSFXPD0412

12,90 € *

Available immediately

FINALLY A REAL INNOVATION FOR PIERCERS

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS

plate
length

Go to item

Titanium Internal Banana Stem (1.2 mm outer diameter with 0.8 mm internal thread)

SKU: TITBP12

5,90 € *

Available immediately

- the 1.2 mm external thread has a 0.8 mm internal thread

Wiresize
length

Go to item

24K Gold PVD Titanium Internal Labret 1.2 mm/04 mm plate (with 0.8 mm internal thread)

SKU: TILP04BG12

10,90 € *

Available immediately

INTERNALLY THREADED GOLD PVD Titanium LABRET PIN
Int. Titanium Labret Stud 1.2 outer diameter with 0.8mm internal thread

material strength
length

Go to item

FLEXTERNAL Titanium Labret 3 mm d-plate, 1.2 mm Stud with triangular plate (for 0.8 mm, 0.9 mm internal thread and Push Pin (TL)) - (made in Germany)

SKU: TLSFXPD0312

12,90 € *

Available immediately

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS

plate
length

Go to item

Push Pin Gold Titanium threadless Labret 1.2mm with 3mm plate

SKU: TTLLP03BG12

9,90 € *

Available immediately

The Labret for a really great insertion system. 0.5 mm inner diameter and 1.2 mm outer diameter

material strength
length

Go to item

Int. titanium Labret with ball 1.2mm, 04mm plate, (single parts)

SKU: TILP04B12

12,90 € *

Available immediately

INTERNALLY THREADED TITANIUM MICRO LABRET PIN (4MM DISC) WITH BALL - Titanium G23

ball size
length

Go to item

Titan TL Insertion pin - for plug-in system without thread

SKU: TTLP

15,90 € *

Available immediately

This insertion pin is ideal for use with threadless piercing jewelry, i.e. the titanium insertion system (TL).
The insertion pin itself has a 0.5 mm thick pin, which can be inserted seamlessly into a threadless piece of jewelry.
The insertion pin is available in the following variations:

- 0.8 mm thick, for threadless jewelry with 0.8 mm thickness
- 1.0 mm thickness, for threadless jewelry with 1.0 mm thickness
- 1.2 mm thickness, for threadless jewelry with 1.2 mm thickness
- 1.6 mm thickness, for threadless jewelry with 1.6 mm thickness

As soon as the insertion pin is attached to the piercing jewelry, it can be inserted perfectly into the piercing site.
After insertion, the insertion aid can simply be removed.
The insertion pin is made of titanium Ti6Al4V-ELI (ASTM F 136).
Length: 35 mm

The material Titanium Ti6Al4V-ELI (ASTM F 136) makes it easy to anodize the insertion pins. Now you can define the sizes using a colour code and simplify your daily studio routine during sterilization. There is no need to measure the thicknesses and you can start packing straight away.

pin length
material strength

Go to item

24K gold PVD titanium push pin threadless labret 1.2 mm with 4 mm plate

SKU: TTLLP04BG12

9,90 € *

Available immediately

The labret for a really great insertion system. 0.5 mm inner diameter and 1.2 mm outer diameter.

material strength
length

Go to item

FLEXTERNAL Titanium Labret 4 mm plate, 1.2 mm thick (for 0.8 mm, 0.9 mm internal thread and threadless) (Made in Germany) - (only while stocks last)

SKU: TLSFXP0412

12,90 € *

Available immediately

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS

plate
length

Go to item

Steel EXT Insertion pin 35 mm for 1.0/1.2/1.6 mm jewelry with internal thread - simply screw (35mm)

SKU: STIPINT

14,90 € *

Available immediately

This insertion pin is ideal for use with piercing jewelry with an internal thread, i.e. the Internal System.
The insertion pin itself has an external thread, which can be screwed seamlessly into all types of internally threaded jewelry.

The Insertion pin is available in the following variations:

- 0.8 mm external thread with 1.0 mm thickness for jewelry with 0.8 mm internal thread and 1.0 mm thickness
- 0.8 mm external thread with 1.2 mm thickness for jewelry with 0.8 mm internal thread and 1.2 mm thickness
- US0.9 mm external thread with 1.2 mm thickness for jewelry with US0.9 mm internal thread and 1.2 mm thickness
- 1.2 mm external thread with 1.6 mm thickness for jewelry with 1.2 mm internal thread and 1.6 mm thickness

As soon as the insertion pin is screwed onto the piercing jewelry, it can be inserted perfectly into the piercing site.
After insertion, the insertion pin can simply be unscrewed.
The insertion pin is made of SS316L surgical steel.
Length: 35 mm

thread
material strength

Go to item

Titanium Internal Circular Barbell 1.2mm with balls

SKU: TBTCIT12

16,90 € *

Available immediately

length
diameter

Go to item

Steel TL insertion pin 35 mm for 1.2 mm jewelry with internal thread - simply insert instead of screwing

SKU: STIPINTN

14,90 € *

Available immediately

This insertion pin is ideal for use with piercing jewelry with an internal thread, i.e. the Internal System.
The insertion pin itself does not have an external thread, so you can simply attach it to internally threaded jewelry instead of having to screw it on first.
The insertion pin is designed for jewelry with a 0.8 mm internal thread and 1.2 mm material thickness.
As soon as the insertion pin is attached to the piercing jewelry, it can be inserted perfectly into the piercing site.
After insertion, the insertion aid can simply be pulled off effortlessly.
The insertion pin is made of SS316L surgical steel.
Length: 35 mm