1.0 mm

1 - 7 / 7

Titanium Threadless (TL) System Reset all filters

FLEXTERNAL Titanium Labret 2.5 mm d-Plate - 1.0 mm Stud with triangular plate (for 0.8 mm, 0.9 mm internal thread and Push Pin (TL)) - (Made in Germany)

SKU: TLSFXPD02510

12,90 € *

Available immediately

FINALLY A REAL INNOVATION FOR PIERCERS

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

Unfortunately, some companies do not use standardized 0.9 mm threads, which is why there may be fitting problems with standardized Labrets (including fleXternal Labrets).

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS

plate
length

Go to item

FLEXTERNAL Titanium Labret 3 mm d-Plate, 1.0 mm Stud with triangular plate (for 0.8 mm, 0.9 mm internal thread and Push Pin (TL)) - (made in Germany)

SKU: TLSFXPD0310

12,90 € *

Available immediately

FINALLY A REAL INNOVATION FOR PIERCERS

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS

plate
length

Go to item

FleXternal Titanium Labret 3.0 mm plate - 1.0 mm (for 0.8 mm, 0.9 mm internal thread and Push Pin (TL)) - (Made in Germany) - (only while stocks last)

SKU: TLSFXP0310

12,90 € *

Available immediately

FINALLY A REAL INNOVATION FOR PIERCERS

Flexible and relaxed when working with piercing jewelry

You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.

All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.

There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS

plate
length

Go to item

FleXternal Titanium Labret 2.5 mm plate - 1.0 mm (for 0.8 mm, 0.9 mm internal thread and Push Pin (TL)) - (Made in Germany) - (only while stocks last)

SKU: TLSFXP02510

12,90 € *

Available immediately

FINALLY A REAL INNOVATION FOR PIERCERS

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS

plate
length

Go to item

Titan TL Insertion pin - for plug-in system without thread

SKU: TTLP

15,90 € *

Available immediately

This insertion pin is ideal for use with threadless piercing jewelry, i.e. the titanium insertion system (TL).
The insertion pin itself has a 0.5 mm thick pin, which can be inserted seamlessly into a threadless piece of jewelry.
The insertion pin is available in the following variations:

- 0.8 mm thick, for threadless jewelry with 0.8 mm thickness
- 1.0 mm thickness, for threadless jewelry with 1.0 mm thickness
- 1.2 mm thickness, for threadless jewelry with 1.2 mm thickness
- 1.6 mm thickness, for threadless jewelry with 1.6 mm thickness

As soon as the insertion pin is attached to the piercing jewelry, it can be inserted perfectly into the piercing site.
After insertion, the insertion aid can simply be removed.
The insertion pin is made of titanium Ti6Al4V-ELI (ASTM F 136).
Length: 35 mm

The material Titanium Ti6Al4V-ELI (ASTM F 136) makes it easy to anodize the insertion pins. Now you can define the sizes using a colour code and simplify your daily studio routine during sterilization. There is no need to measure the thicknesses and you can start packing straight away.