Clamps - Bending - Holding tools - Pliers
Our rounded ring tweezers with a cut are ideal for fixing a wide variety of piercing sites.
- The wheel allows the pliers to be tightened as far as required until the desired area is perfectly fixed.
- The cut allows you to easily pull the tweezers out from the side after piercing.
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | type, surface |
SKU: RAD
Perfect pliers with ratchet handle for inserting Dermal Anchor, Skindiver® or screw-in balls (with or without stone).
Available in different sizes and polishes. One pair of pliers required per size.
Available in different sizes and polishes. One pair of pliers required per size.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | surface, diameter |
SKU: MDT01
For holding a wide variety of Piercings without scratching the surface
Easy handling for both the piercer and the customer.
ATTENTION: Plastic holder on the head can NOT be sterilized, only disinfected. No guarantee if used incorrectly.
Easy handling for both the piercer and the customer.
ATTENTION: Plastic holder on the head can NOT be sterilized, only disinfected. No guarantee if used incorrectly.
| Shipping weight: | 0,08 kg |
| Item weight: | 0,08 kg |
| Variations in: | Size, Surface/Polishing |
SKU: BTZ
Multi tool for pre-turning bioplast threads in 1.2/1.6mm
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | headform, surface |
SKU: MDT02T
Multi tool for pre-turning Bioplast threads in 1.2/1.6mm.
Image for square tool not available.
Image for square tool not available.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | headform, surface |
SKU: MDT01T
Perfect for gripping Barbells with a thickness of 1.2mm, 1.6mm or 2.0mm.
Very easy to use thanks to the "Easy-Finger-System", can be operated with two fingers.
Very easy to use thanks to the "Easy-Finger-System", can be operated with two fingers.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | type, for |
SKU: MFTSTH
Ideal for holding, inserting and attaching Labrets.
The opening and thin walls make grasping and holding the jewelry child's play
The opening and thin walls make grasping and holding the jewelry child's play
| Shipping weight: | 0,02 kg |
| Item weight: | 0,02 kg |
| Variations in: | type, surface |
SKU: MPG
Ideal for holding, inserting and attaching Labrets.
The opening and thin walls make grasping and holding the jewelry child's play
The opening and thin walls make grasping and holding the jewelry child's play
| Shipping weight: | 0,02 kg |
| Item weight: | 0,02 kg |
| Variations in: | type, surface |
SKU: MPGBG
For gripping, holding or attaching jewelry or attachments using the snap-in mechanism.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | design, surface |
SKU: MTL02
For gripping, holding or attaching jewelry or attachments using the snap-in mechanism.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | design, surface |
SKU: MTL01
Perfect for holding Needleblades, pins or needles.
With easy-to-use scissor handle.
With easy-to-use scissor handle.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | type, surface |
SKU: MDT02PH
The Easy Finger (MFT), a ball/Skindiver�/dermal anchor holding tool, is a multifunctional tool for screwing and unscrewing balls, discs, and other jewellery attachments in tight spaces.
It is primarily used to attach or remove attachments in areas with limited movement securely. The tool is also ideal for the precise insertion of dermal anchors and skindivers.
Available in different head sizes, the Easy Finger is compatible with multiple attachments.
Made from high-quality surgical steel (SS316L) with a silver finish, the tool offers a comfortable two-finger grip for maximum control.
A must-have tool for professional piercers.
| Shipping weight: | 0,02 kg |
| Item weight: | 0,02 kg |
| Variations in: | surface, diameter |
SKU: MFT
Ideally suited for inserting Skindiver®, Dermal Anchor and screw ball.
| Shipping weight: | 0,02 kg |
| Item weight: | 0,02 kg |
| Variations in: | surface, diameter |
SKU: MDT02
Mosquito clamp with fine ribbing.
The clamp is available in three different lengths.
The clamp is available in three different lengths.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | surface, length |
SKU: MS
Mosquito clamp with fine ribbing and curved tip.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | surface, length |
SKU: MSB
Mosquito clamp without corrugation.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | surface, length |
SKU: MSO
Mosquito clamp without ribbing.
The clamp is available in three different lengths.
The clamp is available in three different lengths.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | surface, length |
SKU: MSORG
Multifunctional tool ideal for holding/gripping Skindiver® and Dermal Anchor.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | diameter, surface |
SKU: MFTH
For: Skindiver, Dermal Anchor pliers
- Ideal for inserting Skindiver, Dermal Anchor and screw balls.
Easy handling, even with two fingers.
- Ideal for inserting Skindiver, Dermal Anchor and screw balls.
Easy handling, even with two fingers.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | diameter, surface |
SKU: MDT01H
Ideal holding tool for Skindiver® and Dermal Anchor (1.2mm or 1.6mm)
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | diameter, surface |
SKU: MDT02H
This needle holder has integrated scissors that can be used to cut the thread directly.
| Shipping weight: | 0,04 kg |
| Item weight: | 0,04 kg |
| Variations in: | design, surface |
SKU: NHWS
For holding needle / thread.
Great for sewing.
Great for sewing.
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | design, surface |
SKU: NHWO
Pean clamp (coarse toothing)
| Shipping weight: | 0,04 kg |
| Item weight: | 0,04 kg |
| Variations in: | length, surface |
SKU: PENx
Piercing pliers with snap-in mechanism
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | type, surface |
SKU: PTT
Piercing pliers with snap-in mechanism
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | head, surface |
SKU: PTZO
Piercing pliers with snap-in mechanism
| Shipping weight: | 0,03 kg |
| Item weight: | 0,03 kg |
| Variations in: | head, surface |
SKU: PTZR
Suitable for bending and closing Barbells and rings.
| Shipping weight: | 0,08 kg |
| Item weight: | 0,08 kg |
| Variations in: | type, surface |
SKU: RBT
Suitable for bending and closing Barbells and rings.
| Shipping weight: | 0,08 kg |
| Item weight: | 0,08 kg |
| Variations in: | surface, type |
SKU: RBTBG
Is made to bend or close piercing barbells and rings.
| Shipping weight: | 0,08 kg |
| Item weight: | 0,08 kg |
| Variations in: | surface, type |
SKU: RBTRG
Our ring opening pliers are the ideal tool for opening a wide variety of piercing rings, such as clickers, segments, and BCRs. The tip of the pliers is curved outward so that the jewelry is securely fixed during opening.
The integration of a fine spring minimizes the movement of the pliers, allowing for very gentle handling.
We guarantee easy handling for both piercer and customer.
| Shipping weight: | 0,08 kg |
| Item weight: | 0,08 kg |
SKU: ROF
Items 1 - 30 of 37