German
Italian
French
Spanish
Polish1.6 mm
Items 1 - 30 of 172
SS316L CASTING HINGED SEGMENT RING CLICK System
HANDPOLISHED- handpolished
Clicker - Titanium (ASTM F-136)- handpolished
TITANIUM PINS - Titanium G23
TITANIUM BARBELLS - Titanium G23
for 1.2mm thread (at 1.6mm outer diamter)
INTERNALLY THREADED TITANIUM LABRET PIN
Int.Titan Labret Stud 1.6 (with 1.2mm internal thread)
Int.Titan Labret Stud 1.6 (with 1.2mm internal thread)
TITANIUM PINS - Titanium G23
- for 1.6mm outer diameter the inner thread will have 1.2mm
This insertion pin is ideally suited for the use on externally threaded piercing jewellery.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be detached.
The insertion pin is made out of SS316L surgical steel.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be detached.
The insertion pin is made out of SS316L surgical steel.
BCR with a clip in ball. Can not be opened by hand, you need a tool to open and close. (e.g., RON)
TITANIUM BALL CLOSURE RINGS - Titanium G23
TITANIUM BALL CLOSURE RINGS - Titanium G23
This insertion pin is ideally suited for the use on externally threaded piercing jewellery.
The insertion pin itself has an internal thread, into which you can screw the jewellery with external thread.
The insertion aid is available in the following strengths:
- 1.2 mm, 1.6 mm
As soon as the jewellery is screwed into the insertion pin, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion aid can simply be unscrewed.
The insertion pin is made out of SS316L surgical steel.
The insertion pin itself has an internal thread, into which you can screw the jewellery with external thread.
The insertion aid is available in the following strengths:
- 1.2 mm, 1.6 mm
As soon as the jewellery is screwed into the insertion pin, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion aid can simply be unscrewed.
The insertion pin is made out of SS316L surgical steel.
TITANIUM DERMAL ANCHOR - Titanium G23 with symmetric legs
Top
This insertion pin is ideally suited for use on threadless (TL) piercing jewellery.
The insertion aid itself has a 0.5 mm thick pin, which can be attached seamlessly to a threadless jewellery piece.
The insertion pin is available in the following variations:
- 0.8 mm strength, for threadless jewellery with 0.8 mm strength
- 1.0 mm strength, for threadless jewellery with 1.0 mm strength
- 1.2 mm strength, for threadless jewellery with 1.2 mm strength
- 1.6 mm strength, for threadless jewellery with 1.6 mm strength
As soon as the insertion pin is attached onto the piercing jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be removed.
The insertion pin is made of Titanium Ti6Al4V-ELI (ASTM F 136).
Length: 35 mm
Because the insertion pin is made out of Titanium Ti6Al4V-ELI (ASTM F 136), the process of anodizing the tapers is possible. From now on you can use a colour code to distinguish the different sizes and thus simplify your everyday studio routine during the sterilization process. Measuring the diameter will not be necessary anymore, you can now start packing your items right away.
The insertion aid itself has a 0.5 mm thick pin, which can be attached seamlessly to a threadless jewellery piece.
The insertion pin is available in the following variations:
- 0.8 mm strength, for threadless jewellery with 0.8 mm strength
- 1.0 mm strength, for threadless jewellery with 1.0 mm strength
- 1.2 mm strength, for threadless jewellery with 1.2 mm strength
- 1.6 mm strength, for threadless jewellery with 1.6 mm strength
As soon as the insertion pin is attached onto the piercing jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be removed.
The insertion pin is made of Titanium Ti6Al4V-ELI (ASTM F 136).
Length: 35 mm
Because the insertion pin is made out of Titanium Ti6Al4V-ELI (ASTM F 136), the process of anodizing the tapers is possible. From now on you can use a colour code to distinguish the different sizes and thus simplify your everyday studio routine during the sterilization process. Measuring the diameter will not be necessary anymore, you can now start packing your items right away.
Titanium banana with fixed 6 mm ball and internal thread for upper part. Attachment is a 4 mm ball with external thread.
Titanium banana with fixed 8mm disc and internal thread for upper part. Attachment is a 5mm disc with external thread.
TITANIUM CIRCULAR BARBELLS - Titanium G23
Straight titanium pin. On both sides threadless
SINGLE JEWELLED TITANIUM BANANAS - Titanium G23 - Crystals
INTERNALLY THREADED Titanium (ASTM F-136) LABRET PIN
Int.Titan Labret Stud 1.6 outer diameter with 0.8mm internal thread
Because of the 0.8 mm thread you have a big range of attachments
Int.Titan Labret Stud 1.6 outer diameter with 0.8mm internal thread
Because of the 0.8 mm thread you have a big range of attachments
Basics Jewelled - Crystal -Jewelled Bananas
The Labret for a great plug-in system. With 0.5 mm inner diameter and 1.6 mm outer diamter
NICKELFREE HINGED SEGMENT RING HANDPOLISHED- handpolished
Titanium banana with fixed 6 mm jew. ball and internal thread for upper part. Attachment is a 4 mm plain titanium ball with external thread.
TITANIUM LABRETS - Titanium G23
Pre-sterilized piercing jewellery made out of titanium 6AL-4V-ELI / ASTM-F 136.
Why should you take the trouble to sterilize all the jewellery yourself? Think about how much working time/effort you can save when not doing the documentational process, if you buy pre-sterilized piercing jewellery. The material costs for the packaging material etc., are in no relation with the price oft he pre-sterilized jewellery! Our sterile piercing jewellery has hardly any price difference tot he non-sterilized assembled items. So let's go, start shopping the pre-sterilized jewellery an relax when you would normally sterilize your jewellery! <
THE STERILE JEWELLERY IS NOT ASSEMBLED. THE STERILE PACKAGING ONLY CONTAINS THE INDIVIDUAL PARTS.
Why should you take the trouble to sterilize all the jewellery yourself? Think about how much working time/effort you can save when not doing the documentational process, if you buy pre-sterilized piercing jewellery. The material costs for the packaging material etc., are in no relation with the price oft he pre-sterilized jewellery! Our sterile piercing jewellery has hardly any price difference tot he non-sterilized assembled items. So let's go, start shopping the pre-sterilized jewellery an relax when you would normally sterilize your jewellery! <
THE STERILE JEWELLERY IS NOT ASSEMBLED. THE STERILE PACKAGING ONLY CONTAINS THE INDIVIDUAL PARTS.
INTERNALLY THREADED TITANIUM MICRO LABRET PIN (4MM DISC) WITH BALL - Titanium G23
TITANIUM LABRETS WITH BALL - Titanium G23
TITANIUM OPEN STYLE DERMAL ANCHOR - Titanium (ASTM F-136)
The long hole open style is rund on the outside and therefore has a little less material on the side than the normal style version
The long hole open style is rund on the outside and therefore has a little less material on the side than the normal style version
TITANIUM CIRCULAR StemS - Titanium G23
Items 1 - 30 of 172