German
English
French
Spanish
PolishFlexternal© !NOVITÀ!
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all commonly used thread styles fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
ATTENTION:
With the stem-lengths 5 mm and 6 mm you can only use threaded attachments, as the pin of push-pin system attachment is too long.
With a stem-length of 7 mm to 10 mm, as soon as a push-pin system attachment is used on the other side, no more push-pin can be used. For reasons of space, only a threaded attachment can be on the other side of the barbell.
From a stem-length of 11 mm on, you can combine all 3 fixing-systems on both sides.
MADE IN GERMANY - CERTIFIED & CONTROLLED! Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm labrets are suitable for push pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
FINALLY A TRUE INNOVATION FOR PIERCERS
The flexible & relaxed way to work with piercing jewellery.
From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm labrets are suitable for push pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED! - HAND POLISHED
Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS
This insertion pin is ideally suited for use on threadless piercing jewellery.
The insertion aid itself has a pin which can be put on threadless jewellery without bending the pin at all. It will stay safely.
The insertion pin is available in the following variations:
- 1.2 mm strength
- 1.6 mm strength
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
As soon as the insertion pin is pushed onto the piercing jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be removed by twisting the aid slightly and pulling it out simultaneously.
The insertion pin is made of Titanium Ti6Al4V-ELI (ASTM F 136).
Length: 30 mm / 50 mm
Due to it's high surface quality with a ra-value between 0.07 µm and 0.08 µm, we have achieved an almost highly polished surface. This makes the whole process of anodizing the tapers so much easier. From now on you can use a colour code to distinguish the different sizes and thus simplify your everyday studio routine during the sterilization process. Measuring the diameter will not be necessary anymore, you can now start packing your items right away.
The insertion pin itself fits both the 0.8 mm and also the 0.9 mm internal labrets.
The insertion pin is available in the following variations:
- 1.6 mm strength
- 2.0 mm strength
There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.
As soon as the insertion pin screwed onto the piercing jewellery, it can be inserted perfectly into the piercing..
After insertion, the insertion pin can simply be removed by unscrewing it from the jewellery.
The insertion pin is made of Titanium Ti6Al4V-ELI (ASTM F 136).
Length: 30 mm
Due to it's high surface quality with a ra-value between 0.07 µm and 0.08 µm, we have achieved an almost highly polished surface. This makes the whole process of anodizing the tapers so much easier. From now on you can use a colour code to distinguish the different sizes and thus simplify your everyday studio routine during the sterilization process. Measuring the diameter will not be necessary anymore, you can now start packing your items right away.