German
English
French
Spanish
PolishAcciaio chirurgico SS316L
Articolo 1 - 10 di 64
This insertion pin is ideally suited for the use on externally threaded piercing jewellery.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be detached.
The insertion pin is made out of SS316L surgical steel.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be detached.
The insertion pin is made out of SS316L surgical steel.
This insertion pin is ideally suited for the use on externally threaded piercing jewellery.
The insertion pin itself has an internal thread, into which you can screw the jewellery with external thread.
The insertion aid is available in the following strengths:
- 1.2 mm, 1.6 mm
As soon as the jewellery is screwed into the insertion pin, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion aid can simply be unscrewed.
The insertion pin is made out of SS316L surgical steel.
The insertion pin itself has an internal thread, into which you can screw the jewellery with external thread.
The insertion aid is available in the following strengths:
- 1.2 mm, 1.6 mm
As soon as the jewellery is screwed into the insertion pin, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion aid can simply be unscrewed.
The insertion pin is made out of SS316L surgical steel.
Mosquito clamp with fine fluting.
The clamp is available in three different sizes.
The clamp is available in three different sizes.
The septum tool is optimized in a perfect way so that it is much easier to pierce a septum.
The tubular end of the septum forceps is made for a 1.6mm needle to perfectly fit through.
The tubular end of the septum forceps is made for a 1.6mm needle to perfectly fit through.
Ideal for insertion/holding of Skindiver®, Dermal Anchor and Ball
Ideal to open a variety of piercing-rings (hinged/segment/bcr).
Easy utilization for both, piercer and end customer.
The spring is refined, so the movement with the tool is very little and controllable, eg. gentle usage is possible.
The tip of the tool is curved, so the jewellery is fixed during the opening process.
Easy utilization for both, piercer and end customer.
The spring is refined, so the movement with the tool is very little and controllable, eg. gentle usage is possible.
The tip of the tool is curved, so the jewellery is fixed during the opening process.
This insertion pin is ideally suited for the use on externally threaded piercing jewellery.
Furthermore this insertion aid is also suitable for the use of jewellery with larger diameters, such as tunnels or thicker rings.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, 10.0 mm, 12.0 mm, 14.0 mm, 16.0 mm. 18.0 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be unscrewed.
Furthermore this insertion aid is also suitable for the use of jewellery with larger diameters, such as tunnels or thicker rings.
The insertion aid itself has no thread, it has a connection point, that acts as a small notch in which you can put the jewellery.
The insertion aid is available in the following strengths:
- 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm, 8.0 mm, 10.0 mm, 12.0 mm, 14.0 mm, 16.0 mm. 18.0 mm
As soon as the insertion pin is placed on the jewellery, it can be inserted seamlessly into the piercing hole.
After insertion, the insertion pin can simply be unscrewed.
Perfect tool for insertion of Dermal Anchor, Skindiver® or balls (with and without gems).
In different sizes and surfaces available.
For each size of jewellery one tool with same size necessary.
In different sizes and surfaces available.
For each size of jewellery one tool with same size necessary.
Ideal for holding and inserting labrets.
You can easily change the attachments on difficult places.
You can easily change the attachments on difficult places.
Multifunction tool, ideal for insertion/holding of Skindiver®, Dermal Anchor and Balls, easy to handle, also at various different spots.
The tool is very easy to use with only two fingers.
The tool is very easy to use with only two fingers.
Articolo 1 - 10 di 64