Biżuteria z gwintem wewnętrznym Us0.9Mm

FINALLY A TRUE INNOVATION FOR PIERCERS

The flexible & relaxed way to work with piercing jewellery.

From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!

Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.

There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm labrets are suitable for push pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm labrets are suitable for push pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS

FINALLY A TRUE INNOVATION FOR PIERCERS

The flexible & relaxed way to work with piercing jewellery.

From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles, fit into this special fixture!

Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.

There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm labrets are suitable for push pin attachments without shortening them!

FINALLY A TRUE INNOVATION FOR PIERCERS

The flexible & relaxed way to work with piercing jewellery.

From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles, fit into this special fixture!

Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.

There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm labrets are suitable for push pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

ATTENTION:
With the stem-lengths 5 mm and 6 mm you can only use threaded attachments, as the pin of push-pin system attachment is too long.
With a stem-length of 7 mm to 10 mm, as soon as a push-pin system attachment is used on the other side, no more push-pin can be used. For reasons of space, only a threaded attachment can be on the other side of the barbell.
From a stem-length of 11 mm on, you can combine all 3 fixing-systems on both sides.

FINALLY A TRUE INNOVATION FOR PIERCERS

The flexible & relaxed way to work with piercing jewellery.

From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!

Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.

There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!

ATTENTION:
With the stem-lengths 4 mm - 7 mm you can only use threaded attachments, as the pin of push-pin system attachment is too long.
With a stem-length of 8 mm to 10 mm, as soon as a push-pin system attachment is used on the other side, no more push-pin can be used. For reasons of space, only a threaded attachment can be on the other side of the barbell.
From a stem-length of 11 mm on, you can combine all 3 fixing-systems on both sides.

MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS

The flexible & relaxed way to work with piercing jewellery.

From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!

Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.

There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm labrets are suitable for push pin attachments without shortening them!

FINALLY A TRUE INNOVATION FOR PIERCERS

The flexible & relaxed way to work with piercing jewellery.

From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
With FLEXTERNAL you will now have the matching parts on hand at any time, as all standardized thread styles fit into this special fixture!

Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.

There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm labrets are suitable for push pin attachments without shortening them!

MADE IN GERMANY - CERTIFIED & CONTROLLED! - HAND POLISHED
Titanium specification: ISO 5832-3: 2016 (E); ASTM Fl 36-13
Country of Origin: USA
Material Designation: Tl 6AL 4V-ELI TITANIUM ALLOY FOR MEDICAL GRADE IMPLANTS

FINALLY A TRUE INNOVATION FOR PIERCERS

The flexible & relaxed way to work with piercing jewellery.

From now on, your work can be much easier! No need to think about matching thread sizes and styles - no more worries about having the right combination of bar length and thread size in stock.
Every known and standardised thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and push pin for bar material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without loss of strength in the jewellery.

There are significant deviations from standard threads in various jewellery variants. This can therefore lead to compatibility problems with these products.

FLEXTERNAL is a real technical innovation in the piercing jewellery sector. Your piercing work routines have never been more flexible and relaxed!

With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.

The 4.2 mm labrets are suitable for push pin attachments without shortening them!