Material
Not compatible with USA/China goods with inch/gauge units.
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
Int.Titanium Labret 1.2 outer diameter with 0.8mm internal thread
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | external thread strength of ball, ball diameter |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material, diameter |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | external thread strength of ball, ball diameter |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | external thread strength of ball, ball diameter |
FINALLY A REAL INNOVATION FOR PIERCERS
Flexible and relaxed when working with piercing jewelry
You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.
All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.
There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
- the 1.2 mm external thread has a 0.8 mm internal thread
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | Wiresize, length |
Int.Titanium Labret 1.6 outer diameter with 1.2mm internal thread
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
INTERNALLY THREADED GOLD PVD Titanium LABRET PIN
Int. Titanium Labret Stud 1.2 outer diameter with 0.8mm internal thread
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | diameter, length |
TITANIUM BALL CLOSURE RINGS - Titanium G23
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | diameter, inside diameter |
FINALLY A REAL INNOVATION FOR PIERCERS
Flexible and relaxed when working with piercing jewelry
You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.
All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.
There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | Design, diameter |
- the 1.6 mm external thread has a 1.2 mm internal thread
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | Wiresize, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, Attachment size |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | thread strength, diameter |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material, diameter |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | thread strength, diameter |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | ball size, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | external thread strength of ball, ball diameter |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | external thread strength of ball, ball diameter |
The insertion pin itself has a 0.5 mm thick pin, which can be inserted seamlessly into a threadless piece of jewelry.
The insertion pin is available in the following variations:
- 0.8 mm thick, for threadless jewelry with 0.8 mm thickness
- 1.0 mm thickness, for threadless jewelry with 1.0 mm thickness
- 1.2 mm thickness, for threadless jewelry with 1.2 mm thickness
- 1.6 mm thickness, for threadless jewelry with 1.6 mm thickness
As soon as the insertion pin is attached to the piercing jewelry, it can be inserted perfectly into the piercing site.
After insertion, the insertion aid can simply be removed.
The insertion pin is made of titanium Ti6Al4V-ELI (ASTM F 136).
Length: 35 mm
The material Titanium Ti6Al4V-ELI (ASTM F 136) makes it easy to anodize the insertion pins. Now you can define the sizes using a colour code and simplify your daily studio routine during sterilization. There is no need to measure the thicknesses and you can start packing straight away.
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | pin length, material strength |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | thread strength, diameter |
This Dermal Anchor foot has equal sides and can therefore be better placed in narrow areas.
In principle, however, each piercer can decide for himself which variant he is most comfortable with.
The Dermal Anchor with an outer diameter of 1.6 mm can usually be used anywhere, but the Mini Dermal Anchor is preferred for some exceptions.
The skin of the respective customer and the exact body part are always decisive.
Therefore, practical Dermal Anchor training and experience are always helpful before purchasing the material.
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, height |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | external thread strength of ball, ball diameter |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
FINALLY A REAL INNOVATION FOR PIERCERS
Flexible and relaxed when working with piercing jewelry
You can now work freely, regardless of the thread size or thread type of the attachment, without having to think long and hard about whether you have the right combination of Stem and thread in stock.
With FLEXTERNAL, you always have the right solution to hand. Because all standardized thread types fit flexibly into this special holder.
All known and standardized thread types (0.8 mm (Europe/Asia), (0.9 mm (USA/LA) and Push Pin for Stem material thicknesses 1.0 and 1.2 mm) can be attached to the FLEXTERNAL base without any loss of strength in the jewelry.
There are significant deviations from standard threads in various jewelry variants. This can therefore lead to compatibility problems with these products.
FLEXTERNAL is a real technical innovation in the piercing jewelry sector. You have never been so flexible and relaxed when piercing and exchanging jewelry!
With the 4 mm lengths, it is not possible to use push pin attachments without shortening the pin.
The 4.2 mm Labrets are suitable for Push Pin attachments without shortening them!
MADE IN GERMANY - CERTIFIED & CONTROLLED!
Titanium specification: ISO 5832-3: 2016 (E); ASTM F136-13
Raw material origin: USA
Designation: Tl 6AL 4V-ELI ALLOY FOR MEDICAL IMPLANTS
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | plate, length |
The insertion pin itself has an external thread, which can be screwed seamlessly into all types of internally threaded jewelry.
The Insertion pin is available in the following variations:
- 0.8 mm external thread with 1.0 mm thickness for jewelry with 0.8 mm internal thread and 1.0 mm thickness
- 0.8 mm external thread with 1.2 mm thickness for jewelry with 0.8 mm internal thread and 1.2 mm thickness
- US0.9 mm external thread with 1.2 mm thickness for jewelry with US0.9 mm internal thread and 1.2 mm thickness
- 1.2 mm external thread with 1.6 mm thickness for jewelry with 1.2 mm internal thread and 1.6 mm thickness
As soon as the insertion pin is screwed onto the piercing jewelry, it can be inserted perfectly into the piercing site.
After insertion, the insertion pin can simply be unscrewed.
The insertion pin is made of SS316L surgical steel.
Length: 35 mm
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | thread, material strength |
TITANIUM BALL CLOSURE RINGS - Titanium G23
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | diameter, inside diameter |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | Design, diameter |
The special advantage here is the large selection of attachments with 0.8mm thread.
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | material strength, length |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | type, size |
The insertion pin itself does not have an external thread, so you can simply attach it to internally threaded jewelry instead of having to screw it on first.
The insertion pin is designed for jewelry with a 0.8 mm internal thread and 1.2 mm material thickness.
As soon as the insertion pin is attached to the piercing jewelry, it can be inserted perfectly into the piercing site.
After insertion, the insertion aid can simply be pulled off effortlessly.
The insertion pin is made of SS316L surgical steel.
Length: 35 mm
| Item weight: | 0,00 kg |
| Variations in: | thread, material strength |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Variations in: | ball size, length |